Skip to content


INSTRUCTIONS – Before colour

Instructions to use before you apply the colour to enhance

Before you begin you must read and conduct the following to ensure the product is used correctly and is suited for your horse or pony:

Please test prior to show or event to ensure product gives you the results you wish to achieve.

Skin Sensitivity Test

All skin sensitivity tests should be carried out by law. Skin tests should be carried out 48 hours prior to a colour. If possible, testing one week prior to event is recommended.

To test if the horse is sensitive to colour, simply apply a small amount of colour on the horses belly in between their two front legs. Leave on for 48 hours then rinse thoroughly.

If the skin becomes irritated do not use the product.

Tips for successful application:

  • Give yourself time, you will require around 3 hours to complete the whole process properly. Approximately 1 hour to apply the colour and the rest of the time to process and wash off the colour.
  • If possible do not apply the colour in sunlight as it may dry up quickly, apply indoors or under shelter outdoors then take out into sunlight to dry. Try to have a friend help you apply the colour, it takes half the time and you can check each others work to ensure no streaking occurs.
  • Try to enhance your horse or pony at least one week before the event, this gives you time to touch up and allows the colour to look very natural on competition day.
  • Follow the diagram on page 17 for application instructions. We prefer to start on the tougher skin areas as they require a little more time for the colour to process and penetrate.

  • Ensure horse is cooled at least 15 minutes without covers or sweating before applying colour.
  • HSC no ammonia colour is designed to enhance and/or darken coats, not change from one level to another.
  • Colour can stain clothing and accessories, please use caution when applying the colour.

Please follow the instructions provided when colour enhancing:

All kits are prepared for the horse or pony size indicated so that all you need to do is mix all the ingredients into the tub and apply. Try to leave a bit of mixture at the end of colouring your horse for touching up any areas that you may have missed.

White area application:

Paint colour around horses or ponies white patches or socks working from the outside away. For extra protection, before you start colouring apply HSC Treatment or Conditioner to white patches or socks to act as a barrier. If in case some colour does accidentally penetrate use HSC Wipes or Stain Remover to remove colour.

Step 1: Ensure Coat is clear of any product residue or dirt as this can interfere with end colour result. A quick wash the night before or earlier before you apply the colour ensure the hair on the coat is ready for colour enhancing. The horse can be slightly moist before you apply the colour which can help spread the colour easier although it is recommended your horse be at least 80% dry.

Step 2: Place tecnica no ammonia colourª in the tub, place bottle of 10 vol peroxide in the tub, place Oilioneª in the tub and mix together until they form a smooth consistency. Use the following grid to find the right amount to mix:

Select your currency
AUD Australian dollar